Item Specifications and Additional Information:
XDSL Line Drivers
This device is a low power, high output current dual amplifier. It is designed
for the line drive interface in Digital Subscriber Line systems such as ADSL, HDSL2,
and proprietary xDSL systems. In full-bias operation, the drivers can provide 24.4 dBm
output power into low resistance loads. This is enough to power a 20.4 dBm line,
including hybrid insertion loss.
FEATURES:
Full ADSL CO (Central Office) Performance on ±12 V Supplies
Low Power Operation
- ±5 V to ±12 V Voltage Supply
- 12.5 mA/Amp (Typ) Total Supply Current
- Power Reduced Keep Alive Current of 4.5 mA/Amp
High Output Voltage and Current Drive
- IOUT = 600 mA
- 40 V p-p Differential Output Voltage RL = 50Ω,VS = ±12 V
Low Single-Tone Distortion
- –75 dBc @ 1 MHz SFDR, RL = 100 Ω, VO = 2 V p-p
High Speed:
- 78 MHz Bandwidth (-3 dB), G = +5
- 40 MHz Gain Flatness
- 1000 V/us Slew Rates
TYPICAL SPECIFICATIONS:
- (@ 25°C, VS= 12V,RL=100Ω, PWDN0, PWDN1=(1, 1), TMIN=40°C, TMAX=85°C, unless otherwise noted.)
Dynamic Performance:
- –3 dB Bandwidth(G=1, RF=1.5 kΩ, VOUT=0.2 V p-p): 380MHz
- Large Signal Bandwidth (VOUT = 4 V p-p): 90MHz
- Slew Rate(VOUT = 4 V p-p, G = 2): 1000V/us
- Rise and Fall Time(VOUT = 2 V p-p): 2ns
Input Characteristics:
- RTI Offset Voltage: 1.0mV
- +Input Bias Current: -45uA to 45uA
- –Input Bias Current: -75uA to 75uA
- Input Resistance: 400kΩ
- Input Capacitance: 2pF
- Common-Mode Rejection Ratio: 64dB
Output Characteristics:
- Output Voltage Swing(Single-Ended, RL = 100 Ω): -11V to 11V
- Linear Output Current(G = 5, RL = 10 Ω, f1 = 100 kHz,–60 dBc SFDR): 600mA
- Short-Circuit Current: 2000mA
- Capacitive Load Drive: 80pF
Power Supply:
- Operating Range: ±3V to ±13V
- Recovery Time (To 95% of IQ): 25us
- Shutdown Current (250 μA Out of Bias Pin): 1.5mA/Amp
Manufactured by: Analog Devices
Part Number: AD8016ARP-B
Full Datasheet: AD8016ARP-B |
