UCN5804B BiMOS II Unipolar Motor Controller IC Allegro
Manufacturer: Allegro
Part Number: UCN5804B
Package: Dip
Mounting: Through Hole
Number Leads/Terminals: 16
Material: Plastic
Color: Black
Shape: Rectangle
Termination Method: Solder
Price: $20.00
59 available for immediate delivery
Code: IC746APH05
Weight: 0.05oz
Additional Information
Stepper-Motor Translator/Driver ICBiMOS II Unipolar
(PULLS)
The UCN5804B uses low-power CMOS logic with high-current and high-voltage bipolar outputs to provide complete control and drive for a four-phase unipolar stepper-motor with constant output current ratings to 1.25 per phase (1.25A start-up) and 35V. These BiMOS II translator/drivers are rated for operating temperatures from -20�C to 85�C.
Features:
- 1.5 A Maximum Output Current
- 35 V Output Sustaining Voltage
- Wave-Drive, Two-Phase, and Half-Step Drive Formats
- Internal Clamp Diodes
- Output Enable and Direction Control
- Power-ON Reset
- Internal Thermal Shutdown Circuitry
Maximum Ratings
Output voltage: 50.0v
Output Sustaining Voltage: 35.0V
Output Sink Current: 1.5A
Logic Supply Voltage: 7.0V
Input Voltage: 7.0V
Typical Electrical Characteristics
(TA=25�C, TJ ≤ 150�C, VDD = 4.5V to 5.5V unless otherwise noted):
Output Leakage Current (VOUT = 50 V): 10uA
Output Sustaining Voltage (IOUT = 1.25 A, L = 3 mH): 35V min.
Output Saturation Voltage (IOUT = 1 A): 1.1V
Clamp Diode Leakage Current (VR = 50 V): 10uA
Clamp Diode Forward Voltage (IF = 1.25 A): 1.5V
Input Current
- IIN (1) (VIN = VDD): 0.5uA
- IIN (0) (VIN = 0.8 V): -0.5uA
Input Voltage
- VIN(1) (VDD = 5 V): 3.5V to 5.3V
- VIN(0): -0.3V to 0.8V
Supply Current (2 Outputs ON): 20mA
Turn-Off Delay (50% Step Inputs to 50% Output): 10us max.
Turn-On Delay (50% Step Inputs to 50% Output): 10us max.
Thermal Shutdown Temperature: 165�C
Condition: pulls
Manufactured by: Allegro
Part Number: UCN5804B
Full Datasheet: Allegro Stepper Motor Translator/Driver IC UNC5804B
The UCN5804B uses low-power CMOS logic with high-current and high-voltage bipolar outputs to provide complete control and drive for a four-phase unipolar stepper-motor with constant output current ratings to 1.25 per phase (1.25A start-up) and 35V. These BiMOS II translator/drivers are rated for operating temperatures from -20�C to 85�C.
Features:
- 1.5 A Maximum Output Current
- 35 V Output Sustaining Voltage
- Wave-Drive, Two-Phase, and Half-Step Drive Formats
- Internal Clamp Diodes
- Output Enable and Direction Control
- Power-ON Reset
- Internal Thermal Shutdown Circuitry
Maximum Ratings
Output voltage: 50.0v
Output Sustaining Voltage: 35.0V
Output Sink Current: 1.5A
Logic Supply Voltage: 7.0V
Input Voltage: 7.0V
Typical Electrical Characteristics
(TA=25�C, TJ ≤ 150�C, VDD = 4.5V to 5.5V unless otherwise noted):
Output Leakage Current (VOUT = 50 V): 10uA
Output Sustaining Voltage (IOUT = 1.25 A, L = 3 mH): 35V min.
Output Saturation Voltage (IOUT = 1 A): 1.1V
Clamp Diode Leakage Current (VR = 50 V): 10uA
Clamp Diode Forward Voltage (IF = 1.25 A): 1.5V
Input Current
- IIN (1) (VIN = VDD): 0.5uA
- IIN (0) (VIN = 0.8 V): -0.5uA
Input Voltage
- VIN(1) (VDD = 5 V): 3.5V to 5.3V
- VIN(0): -0.3V to 0.8V
Supply Current (2 Outputs ON): 20mA
Turn-Off Delay (50% Step Inputs to 50% Output): 10us max.
Turn-On Delay (50% Step Inputs to 50% Output): 10us max.
Thermal Shutdown Temperature: 165�C
Condition: pulls
Manufactured by: Allegro
Part Number: UCN5804B
Full Datasheet: Allegro Stepper Motor Translator/Driver IC UNC5804B