TPS74801DRCR LDO Voltage Regulator IC Texas Instruments®
Manufacturer: Texas Instruments®
Part Number: TPS74801DRCR
Amps: 1.5
Voltage: .8 - 3.6
Package: DRC
Lead/Terminal Type: Surface Mount
Number Leads/Terminals: 10
Shape: Square
Price: $2.10
Sorry, we are currently sold out of
'TPS74801DRCR LDO Voltage Regulator IC Texas Instruments®'.
Please check back later.
'TPS74801DRCR LDO Voltage Regulator IC Texas Instruments®'.
Please check back later.
Code: IC687APH02
Weight: 0.01oz
|
Additional Information
Low Drop-Out Voltage Regulators ICsProgrammable Soft-Start
Positive Adjustable
The TPS74801DRCR is a low drop-out linear regulator. Capacitive inrush current is decreased with the programmable soft-start. This reduces stress on the input power source. The monotonic soft-start works well for powering a variety of processors and ASICs.
Features:
- Ultra-Low VIN and VOUT Range: 0.8V to 5.5V
- VBIAS Range 2.7V to 5.5V
- Low Dropout: 60mV typ at 1.5A, VBIAS = 5V
- Power Good (PG) Output Allows Supply Monitoring or Provides a Sequencing Signal for Other Supplies
- 2% Accuracy Over Line/Load/Temperature
- Programmable Soft-Start Provides Linear Voltage Startup
- VBIAS Permits Low VIN Operation with Good Transient Response
- Stable with Any Output Capacitor ≥ 2.2μF
Typical Electrical Characteristics (TA=25°C unless otherwise noted):
(Please see data sheet for test conditions)
Input voltage range: VOUT+VDO to 5.5V
Internal Reference: 0.8V
Output Voltage Range: VREF to 3.6V
Line regulation: 0.03%/V
Load regulation: 0.09%/A
VIN dropout voltage: 60nV
VBIAS dropout voltage: 1.31V
Current limit: 2.0A to 5.5A
Shutdown supply current: 1uA
Output noise voltage: 25 x VOUT uVRMS
Soft-start charging current: 440nA
Applications:
- FPGA Applications
- DSP Core and I/O Voltages
- Post-Regulation Applications
- Applications with Special Start-Up Time or Sequencing Requirements
- Hot-Swap and Inrush Controls
Manufactured by: Texas Instruments®
Part Number: TPS74801DRCR