10W 1.2K ohm 5% Wirewound Resistor 10CS 1K2 5%
Manufacturer: Ate Electronics (Italy)
Part Number: 10CS 1K2 5%
Tolerance (%): 5
Lead/Terminal Type: Axial
Number Leads/Terminals: 2
'10W 1.2K ohm 5% Wirewound Resistor 10CS 1K2 5%'.
Please check back later.
Power Wirewound Resistors
Meets or exceeds requirements for MIL-R-26E specs.
The performance of these resistors is improved by close tolerance, very low temperature coefficient, and excellent operational stability in severe weather conditions. The completely welded construction terminal to terminal and the selected wire elements combined with the ceramic core chemically inert with centerless ground for uniformity all give it it's high level of reliability.
Core: Ceramic steatite or alumina centerless ground
End Caps: Stainless Steel
Coating: High temperature silicone
Standard Terminals: Tinned copper or tinned copperweld
Rated Power: 13W
Resistance: 1.2K ohms
Max. Working Voltage: 940V
Dielectric Strength: 500Vdc
Insulation Resistance: 1000 Mohm min. dry ; 100 Mohm min. after moisture test
Short time Overload: 5 sec. at 10 times rated power
Diameter: 9.5mm +/- 0.5mm
Length: 46mm +/- 1.6mm
Lead Diameter; 0.9mm
Manufactured by: ATE Electronics (Italy)
Part number: 10CS 1K2 5%
Full datasheet: 10CS 1K2 5%