{"id":3932,"date":"2018-12-16T09:44:17","date_gmt":"2018-12-16T14:44:17","guid":{"rendered":"https:\/\/www.westfloridacomponents.com\/blog\/?p=3932"},"modified":"2018-04-29T09:45:30","modified_gmt":"2018-04-29T14:45:30","slug":"condition-monitoring-mems-accelerometers","status":"publish","type":"post","link":"https:\/\/www.westfloridacomponents.com\/blog\/condition-monitoring-mems-accelerometers\/","title":{"rendered":"Condition Monitoring with MEMS Accelerometers"},"content":{"rendered":"

In the market today, several condition-monitoring products are available as easy to deploy and highly integrated devices. A vast majority of them contain a microelectromechanical system or MEMS accelerometer as their core sensor. Not only are these economical, they also help in reducing the cost of deployment and ownership. In turn, this expands the facilities and the number of equipment benefitting from a condition monitoring program.<\/span><\/p>\n

Compared to the legacy mechanical sensors, solid state MEMS accelerometers offer several attractive attributes. So far, their low bandwidth had restricted their application for use in condition monitoring. For instance, the noise performance of MEMS accelerometers was found to be not sufficiently low to cater to diagnostic applications requiring low noise levels over bandwidths beyond 10 KHz and over high frequency ranges.<\/span><\/p>\n

The above situation is changing. Although still restricted of a few KHz of bandwidth, MEMS accelerometers with low noise are now available allowing the designers of condition monitoring products to use them in their new product concepts. This is because the use of MEMS brings several valuable and compelling advantages to the designer.<\/span><\/p>\n

For instance, the size and weight of the MEMS accelerometers are of the utmost importance to airborne applications in health and usage monitoring systems, especially as they employ multiple sensors on a platform. MEMS devices in surface mount packages in a triaxial formation provide very high performance, while their footprints are only 6 x 6 mm, and weigh less than one gram. This shrinks the final package, while the interface of a typical MEMS device uses a single supply, which makes it easier to use in digital applications by saving on cost and weight of cables.<\/span><\/p>\n

The triaxial arrangement is simpler with solid-state electronics and the small size of the transducers. They offer a small form factor enabling mounting on a printed circuit board, with the assembly hermetically sealed in housing suitable for fitting on a machine. MEMS devices require very low levels of power from single voltage supply and simple signal conditioning electronics, suitable for battery-powered wireless products.<\/span><\/p>\n

Designers are able to use MEMS accelerometers in industrial settings for easy transition to digital interfaces now common. This is because the topology of the signal conditioning circuit for MEMS devices is common with both analog and digital output variations, allowing them to adapt the sensors to a wider variety of situations.<\/span><\/p>\n

For instance, designers can load open protocols such as the Modbus RTU into a micro-controller, while using them with easily available RS-485 transceiver chips. Using surface mount chips, designers can lay out the complete solution for a transmitter with small footprint and fit them within relatively small board areas. They can insert these assemblies into packages, hermetically sealing them for supporting intrinsically safe characteristics or for conforming to environmental robustness certifications.<\/span><\/p>\n

Although the current generation of MEMS devices can safely withstand 10,000 g of shock according to their specifications, in reality they can tolerate much higher levels without affecting sensitivity specifications. For instance, automatic test equipment can trim the sensitivity of a high-resolution sensor to remain stable over time and temperature to 0.01\u00b0C.<\/span><\/p>\n","protected":false},"excerpt":{"rendered":"

In the market today, several condition-monitoring products are available as easy to deploy and highly integrated devices. A vast majority of them contain a microelectromechanical system or MEMS accelerometer as their core sensor. Not only are these economical, they also help in reducing the cost of deployment and ownership. In turn, this expands the facilities […]<\/p>\n","protected":false},"author":2,"featured_media":0,"comment_status":"closed","ping_status":"closed","sticky":false,"template":"","format":"standard","meta":{"footnotes":""},"categories":[1423],"tags":[1032,2104,796],"class_list":["post-3932","post","type-post","status-publish","format-standard","hentry","category-sensors","tag-guides","tag-mems-accelerometers","tag-sensors"],"_links":{"self":[{"href":"https:\/\/www.westfloridacomponents.com\/blog\/wp-json\/wp\/v2\/posts\/3932"}],"collection":[{"href":"https:\/\/www.westfloridacomponents.com\/blog\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/www.westfloridacomponents.com\/blog\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/www.westfloridacomponents.com\/blog\/wp-json\/wp\/v2\/users\/2"}],"replies":[{"embeddable":true,"href":"https:\/\/www.westfloridacomponents.com\/blog\/wp-json\/wp\/v2\/comments?post=3932"}],"version-history":[{"count":1,"href":"https:\/\/www.westfloridacomponents.com\/blog\/wp-json\/wp\/v2\/posts\/3932\/revisions"}],"predecessor-version":[{"id":3933,"href":"https:\/\/www.westfloridacomponents.com\/blog\/wp-json\/wp\/v2\/posts\/3932\/revisions\/3933"}],"wp:attachment":[{"href":"https:\/\/www.westfloridacomponents.com\/blog\/wp-json\/wp\/v2\/media?parent=3932"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/www.westfloridacomponents.com\/blog\/wp-json\/wp\/v2\/categories?post=3932"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/www.westfloridacomponents.com\/blog\/wp-json\/wp\/v2\/tags?post=3932"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}