15W Cordless Battery Operated Soldering Iron Wall Lenk BP150
Price: $15.99
Sorry, we are currently sold out of
'15W Cordless Battery Operated Soldering Iron Wall Lenk BP150'.
Please check back later.
'15W Cordless Battery Operated Soldering Iron Wall Lenk BP150'.
Please check back later.
Code: J255AHF06
Weight: 6.00oz
Additional Information
The Wall Lenk solder iron is a portable solution when electricity is not an option!The BP150 soldering iron comes with a protective cover
It uses 4 1.5V alkaline AA batteries which are not included
Instructions
It is recommended that you use this 15W solder iron for:
Fine Wiring including intricate soldering, printed circuit boards, marine wiring, CB's, ham radios, field service requests
Electronics including TVs, radios, stereos, computers, games and toys
Hobbies including model building, model railroads, radio control (r/c) models, slot and scale cars and jewelry making
Features:
Develops maximum 1050°F tip temperature
Reaches 365°F in about 7 seconds
Operates for approximately 50 minutes of continuous use with fresh batteries
Will complete approximately 160 solder joints with fresh batteries
Has a long life, iron-plated anti-corrosion tip
Lightweight - about 5 ounces with batteries (less than 3 ounces without)
Built-in LED light illuminates work area
Recommended solder:
Lead-free solder is recommended for this solder iron
Cautions:
Use carefully
The tip is extremely hot during use. Avoid contact with hands, skin and other objects
Use only in well ventilated areas
Hot irons can cause severe burns. Do not touch the heated tip or knurled nut
Not a toy. Store out the reach of children.
Always be sure the unit is cool before storing
Do not replace cap without switching unit off and ensuring tip has cooled
Do not attempt to readjust or repair. Unit is not user serviceable.
When replacing batteries, replace all of the batteries with the correct type.
Do not mix new batteries with used batteries or batteries of a different type
Be sure to insert batteries properly (+/-)
Be sure to remove the batteries before storing the unit
Warning: This product when used for soldering and similar applications, produces chemicals known to the State of California to cause cancer and birth defects (or other reproductive harm).
West Florida Components is not responsible for the use or misuse of these products. Please view our Terms of Use before making your purchase. Your purchase constitutes your acceptance of our Terms of Use.
Manufactured by: Wall Lenk
Part number: BP150