VND5160AJTR-E High Side Driver IC STMicroelectronics
Price: $1.48
100 available for immediate delivery
Code: CS111PD
|
Additional Information
Double Channel High Side Driver ICs
PowerSSO-12™ Package
With one side of the VND5160AJ-E connected to ground this device is designed to drive resistive or inductive loads. Protection from low energy spikes comes from the active VCC pin voltage clamp. If the CD_DIS is driven low or left open the VND5160AJ-E uses an analog current sense to send a current comparable to the load current. The current sense pin is in a high impedance position when the CS-DIS is driven in high. In overload condition the piece is protected with output current limitation.
Typical Electrical Specs:
- (8V
Undervoltage shutdown: 3.5V
On state resistance: 320mΩ
- (IOUT= 0.5A; Tj= 150°C)
Clamp voltage: 46V
Turn-On delay time (RL-26Ω): 10µs
Turn-Off delay time (RL=26Ω): 15µs
Low level input current (VIN=0.9V): 1 µA min.
Input hysteresis voltage: 0.25V min.
CS_DIS low level voltage: 0.9V max.
High level CS_DIS current: 10µA max.
Features:
Very low stand-by current
3.0V CMOS compatible input
Optimized electromagnetic emission
Very low electromagnetic susceptibility
Current sense disable
Thermal shutdown indication
Very low current sense leakage
Undervoltage shut-down
Overvoltage clamp
Load current limitation
Applications:
All types of resistive, inductive and capacitive loads
Suitable as LED driver
Manufactured by: STMicroeletronics
Part Number: VND5160AJTR-E
Full Datasheet: VND5160AJTR-E