MC33899VWR2 MC33899 VWR2 IC Freescale
Price: $0.89
50 available for immediate delivery
Code: CS142PD
|
Additional Information
Programmable H-Bridge Power IC
30 Pin HSOP Package
Features:
Drives inductive loads in a full H-Bridge configuration
Current mirror output signal (gain selectable via external resistor)
Short-circuit current limiting
Thermal shutdown (outputs latched off until reset via the SPI)
Internal charge pump circuit for the internal high side MOSFETs
SPI-selectable slew rate control and current limit control
Over-temperature shutdown
Outputs can be disabled to high-impedance state
PWM-able up to 11kHz @ 3.0A
Synchronous rectification control of the high side MOSFETs
Low RDS(ON) outputs at high junction temperature (< 165mΩ @ TA = 125°C, VIGNP = 6.0V)
Outputs survive shorts to -1.0V
Static Electrical Specs:
- (-40°C ≤ TJ ≤ +150°C, 4.75V ≤ VCC ≤ 5.25V, 3.14V ≤ VCCL ≤ 3.47V, 2.97V ≤ VDDQ ≤ 5.25V, 6.0V ≤ VIGNP ≤ 26.5V, unless otherwise noted. Typical values reflect the approximate parameter means at TA = 25°C under nominal conditions, unless otherwise noted.
Power Input
VIGNP Operating Power: 6.0V min. ; 26.5V max.
VIGNP Operating Current: 10mA max.
- (VIGNP = 14.5V, H-Bridge Disabled, EN1 = EN2 = 5.0V)
VIGNP Sleep Current (EN1 = EN2 = 0 V): 145µA
VCC Operating Voltage: 4.75V min. ; 5.25V max.
VCC Operating Current @ 5.0V: 5.0mA max.
VCC Sleep Current (EN1 = EN2 = 0V): 25µA
Power-On Reset:
Power-ON Reset Threshold VCC Rising: 3.8V min ; 4.7V max.
Power-ON Reset Threshold VCCL Rising: 2.5v min. ; 2.95v max.
Power-ON Reset Hysteresis: 0.2V min. ; 0.5V max.
Power Output:
Breakdown Voltage (S0, S1, VIGNP: I = 20mA): 40V
ON-Resistance (Each Output FET): 165mΩ max.
- (IOUT = 3.5A, VIGNP = 6.0V)
Manufactured by: Freescale
Part Number: MC33899VWR2
Full Datasheet: MC33899VWR2
RoHS Compliant