PIC16CE624-20P OTP 8 Bit CMOS MCU with EEPROM Data Memory
Part Number: PIC16CE624-20P
11 available for immediate delivery
Additional InformationOTP 8-Bit CMOS MCU with EEPROM Data Memory
The PIC16CE62X are 18 Pin EPROM-based members of the versatile PICmicroŽ family of low-cost, high-performance, CMOS, fully-static, 8-bit microcontrollers with EEPROM data memory.
All PICmicroŽ microcontrollers employ an advanced RISC architecture. The PIC16CE62X family has enhanced core features, eight-level deep stack, and multiple internal and external interrupt sources. The separate instruction and data buses of the Harvard architecture allow a 14-bit wide instruction word with separate 8-bit wide data.
The two-stage instruction pipeline allows all instructions to execute in a single- cycle, except for program branches (which require two cycles). A total of 35 instructions (reduced instruction set) are available. Additionally, a large register set gives some of the architectural innovations used to achieve a very high performance.
PIC16CE62X microcontrollers typically achieve a 2:1 code compression and a 4:1 speed improvement over other 8-bit microcontrollers in their class. The PIC16CE624 have 96 bytes of RAM. Each microcontroller contains a 128x8 EEPROM memory array for storing non-volatile information, such as calibration data or security codes. This memory has an endurance of 1,000,000 erase/write cycles and a retention of 40 plus years.
Each device has 13 I/O pins and an 8-bit timer/counter with an 8-bit programmable prescaler. In addition, the PIC16CE62X adds two analog comparators with a programmable on-chip voltage reference module. The comparator module is ideally suited for applications requiring a low-cost analog interface (e.g., battery chargers, threshold detectors, white goods controllers, etc).
PIC16CE62X devices have special features to reduce external components, thus reducing system cost, enhancing system reliability and reducing power consumption. There are four oscillator options, of which the single pin RC oscillator provides a low-cost solution, the LP oscillator minimizes power consumption, XT is a standard crystal, and the HS is for High Speed crystals. The SLEEP (power-down) mode offers power savings. The user can wake-up the chip from SLEEP through several external and internal interrupts and reset.
Program Memory: 1Kx14
RAM Data Memory: 96x8
EEPROM Data Memory: 128x8
Manufactured by: Microchip
Part Number: PIC16CE624-20/P
Full datasheet: PIC16CE624-20/P