380FPAFNL Frame Processing Accelerator IC Texas Instruments®
![]() |
Manufacturer: Texas Instruments®
Part Number: TI380FPAFNL
Package: S-PQCC-J52
Mounting: Surface Mount
Number Leads/Terminals: 52
Shape: Square
Termination Method: Solder
Price: $15.00
40 available for immediate delivery
Code: IC413PD
|
Additional Information
FPA Packetblaster IC's52 Pin FN (S-PQCC-J52) Package
The TI380FPA is a frame processing accelerator. This device is used to increase the rate of frame processing by the network communications processor.
The TI380FPA is responsible for the following:
-Management of all commprocessor protocol handler (PH) operations. The FPA manages all receive- and transmit-frame queues.
-Management of adapter buffers. The FPA manages all adapter memory buffers, allocating them to the appropriate queues as required.
-Management of host direct memory access (DMA) by way of the commprocessor system interface (SIF) DMA controller.
-Management of frame transfers to the host. The FPA manages queues of frames to and from the host, manages rx/tx list information, and coordinates the two.
-Gathering adapter and network statistics in dedicated hardware counters.
Features:
Frame-Processing Accelerator for TI380C2x and TI380C3x
Supports TI380C2x and TI380C3x Token-Ring Adapters
Supports TI380C2x Ethernet Adapters
Supports 4- or 6-MHz Adapter Local Bus Operation
Interfaces Directly to TI380C2x Network Commprocessors
Hardware Capture of Network Statistics
Increases Adapter-Frame-Processing Rate up to 28K Frames per Second
Single 5-V Supply
0.8-mm CMOS Technology
Manufactured by: Texas Instruments®
Part Number: TI380FPAFNL