Why would anyone want an FTP server and that too powered by the sun? Well, with an FTP server, you can access all your digital files from anywhere with an internet connection. The sun-powered bit has two advantages, the sun charges those standby batteries and the expense does not show up in your utility bills.

For the project all the parts used are standard items. The Single Board Computer used is the Raspberry Pi (RBPi), a convenient case with all the right slots for the output ports and a small solar panel. Additionally, you will also need a solar charger and a battery box to house the four AAA sized rechargeable NiMH batteries and a micro-USB cable.

A word about the solar panel; you can buy the solar panel from Cottonpickers. The advantage is you get a solar panel with a built-in battery box and a box for the RBPi together. All you have to do is to slide in the RBPi and plug in the batteries. This model has an on/off switch, so you do not have to pull out the cord to switch off. The batteries keep charging even with the switch in the off position.

A blue LED on charger lights up when the sun is charging the batteries. There is also a USB socket, which you can use for charging other USB devices such as mobile phones. Cottonpickers also supplies a USB cable along with the solar panel, so you have almost everything you need for the project.

The solar panel supplies a little more than 300mA, which means that it is perfect for charging 3000mAH NiMH batteries, since they require a C/10 charging rate. The panel has blocking diodes to prevent the batteries from discharging through the cells.

The RBPi model B, with all its keyboard, mouse, TV and networking plugged in and running consumes about 400mA, which the solar panel can easily meet if the sun is shining in its full glory. When the sun goes down, the battery takes over seamlessly. The solar panel can fully charge four AAA cells of 750mAH capacity within three hours. This allows an operation time of more than one and a half hours on the battery.

Charging four AA cells rated at 3000mAH takes the panel about 10 hours to complete. That means if the panel is left in the sun the whole day, the battery will be fully charged for the night. The options you have are:

Powering your RBPi directly from the sun and use the four NiMH cells as a buffer when the sun hides behind clouds. Let the solar panel charge the battery of cells during the day and you can use your RBPi at night.

Next, you will need a static IP address. This is essential, as the address will let your network firewall know it has to allow incoming FTP requests from there. You will also need a vnc-server and load it up as a service every time the RBPi boots up. For the FTP, use the Very Secure FTP Daemon or VSFTPD. Setup all the software as per the instructions found on CNET and you are ready to go. Don’t forget that your RBPi needs a lot of sunshine!